Tessco Wireless Journal October November 2015 Page 11 TESSCO Wireless Journal October/November 2015

OCTOBER NOVEMBER 2015 11 See TESSCO's entire product offering and your pricing on TESSCO.com or call TESSCO at 888.743.0655. INFRASTRUCTURE SOLUTIONS INFRASTRUCTURE SOLUTIONS HD V-Boom Ideal Solution for Heavy Equipment Loads Sabre Site Solutions' HD V-Boom is your solution for heavy-duty equipment loads. Designed for today's technology, the 12' V-Boom with a 3' standoff is strong enough for both your current and future needs. It has the capacity to handle four 8-foot by 18-inch antennas and eight radio remote units (RRUs) per sector. Built with safety in mind, the new HD V-Boom was analyzed by a third party engineer for 12 wind directions. It is structurally sound for a maximum factored wind load of 1280 pounds of antennas/equip- ment per mounting pipe. Featuring round members, it provides some of the lowest EPA in the industry. Sabre Site Solutions' new HD V-Boom is designed and packaged for ease of installation. It has easily adjustable connections to account for leg taper or azimuth. Visit www.tessco.com/go/sabre. TESSCO No. 512384 12' V-Boom, 3' Standoff With Crossover Plate Kit, 2-3/8" to 2-3/8" List: $1,513.50 TESSCO No. 517615 12' V-Boom, 3' Standoff With Crossover Plate Kit, 2-3/8" to 2-7/8" List: $1,588.50 TESSCO No. 542384 10' V-Boom, 3' Standoff With Crossover Plate Kit, 2-3/8" to 2-3/8" List: $1,588.50 TESSCO No. 512383 10' V-Boom, 3' Standoff With Crossover Plate Kit, 2-3/8" to 2-7/8" List: $1,588.50 Narrow Beam Antenna Designed to Address LTE Data Capacity Challenges Galtronics' EXTENT P-GTx2003- D2-XR narrow beam (20/60) antenna is especially designed to address LTE data capacity challenges for high-capacity venues such as stadium, arenas, and speedways. The antenna is perfectly optimized to enable high sectorization of wireless networks with minimal sector-overlap, which ultimately results in higher data throughput. This performance is achieved through minimal sidelobes that are maintained over the frequency range of 698-960/1695- 2700 MHz. The ultra-wideband dual-polarized antenna supports 2x2 MIMO performance over all global LTE/4G frequency bands. Features of the P-GTx2003-D2-XR 20/60 MIMO antenna include: Low VSWR of <1.5:1 MIMO support across the frequency range of 698-960/1695-2700 MHz Connector Type 4.3-10 DIN(F) or 7-16 DIN (F) Front-to-Back Ratio: 25/30 dB PIM certification guaranteed: < -153 dBc @ 243 dbm, with every port and band tested prior to shipment. With its compact size of 14"x 35" x 6.7" and the rounded fiberglass radome, the antenna blends nicely into every environment. Several flexible mounting brackets are available to allow a precise antenna alignment to achieve the best system performance. Visit www.tessco.com/go/galtronics. TESSCO No 524447 698-960/1695-2700 MHz Directional Single-Sector MIMO Antenna List: $1,656.20 Narrow Beam Antenna NEW True Sine Wave Series of Inverter/Chargers The new generation Freedom HFS from Xantrex is an all-in-one solution that provides AC power for appliances and tools. It also charges batteries quickly and more gently than a converter! The Freedom HFS inverter/ charger features true sine wave output and is available in two models: 1000 watts with a 55-amp charger and 2000 watts with a 55-amp charger. The charger is equipped with ignition control capability and programmable smart battery management logic and quick-connect AC terminals on both AC input and output for easy installation. Product Features 1000/2000 watts of continuous AC power Fast-charging, 55-amp, 12 Vdc multi-stage charger 2X continuous power surge for demanding loads Wide temp performance from -20C (-4F) to 50C (122F) Quality, reliability, and safety that meets stringent CSA and UL458 with marine supplement standard Designed for fast installation Dead battery charging down to 0 Vdc Remote panel included Customized, low-voltage disconnect Overload, over temperature, under/over voltage protection Visit www.tessco.com/go/xantrex. TESSCO No. 524480 Freedom 807-2055 HFS2000 Pure Sine Wave 120 Vac DC-to-AC Inverter/ Charger with Built-in Transfer Switch List: $9.99 Pure Sine Wave Inverter/Charger Frame Sector Mount Optimized Mounts Handle Unavoidable Network Changes As network demands rise, operators attempt to increase capacity, which often leads to adding additional, heavier equipment at the top of the towers. Unfortunately, current mount designs do not account for this increase in equipment weight and wind load, and require reinforcements such as kickers, stiff arms, and stabilizers, that in turn add extra weight, wind load, lease costs, and additional engineering analysis. CommScope's new G2 mount designs address these challenges, as they were designed to exceed current and future equipment needs by lowering the mount's generated wind load (EPA-Effective Projected Area) and increasing the load bearing capabilities. Engineered for use up to 400 ft. AGL and able to withstand gusts up to 140 mph, the G2 mounts can support equipment weighing as much as 1,500 pounds/ sector. With welded support brack- ets and partially assembled frame, CommScope protects the integrity of the engineered design, while reducing components, decreasing installation time, and minimizing field errors. The G2 mounts have a chem- ically-etched, alloy tag that allows for traceability back to manufacturing and engineering to identify true mount load capabilities. Visit www.tessco.com/go/commscope. TESSCO No. 521999 Enhanced Load 10'-6" Frame Sector Mount List: $1,819.20 TESSCO No. 538000 Enhanced Load 12'-6" Frame Sector Mount List: $1,851.20 TESSCO No. 507999 Enhanced Load 14'-6" Frame Sector Mount List: $1,875.20 Log on to see whats new. Providing knowledge to choose the right products. Choices to configure the best solutions. On-time delivery and on-budget deployments. TESSCO.com

Previous Page
Next Page